TLZJ-M2

Product Specification/Characteristic

Appearance ：white odorless powder
Toxicity: nontoxic
Flammability: nonflammable
Solubility: soluble in water
PH Value: ≥ 7
Corrosiveness: noncorrosive

Application:

flame retardant treatment in wood and other fiber materials. New type of wood flame retardant(TLZJ-M2) is refined by modern high-new technology of flame retardant, based on the molecular structure of deliquescent high polymer and the theory of flame retardant. It contains a variety of compound flame retardant elements, and it is nontoxic, environment-friendly, having high-efficient performance of flame retardant, simple using method and wide application. Because of neutral PH value, noncorrosive to facilities, and soluble in water(the aqueous solution is transparent and deposit-free), TLZJ-M2 is applied in retardant treatment of woods, papers, cotton textiles and blended textiles; it has good compatibility and wettability, having capability of flame retarding, smoke-suppressing and corrosion-resistant; it makes good effect on preventing flame and nonflame burning, and it only carbonizes but not to burn after the basic material is treated, won’t effect the basic material.

Technical description of application

⑴ Dispensing methods of treating solution: 10%～15% aqueous solution(flame retardant: water=1:8) will be made up by flame retardant according to different requirement about retarding performance, storage of treating solution, using temperature and wood permeability. Add measured flame retardant into dissolving tank which has fixed amount of soft water, agitate/stir till absolute dissolution, and transparent aqueous solution of TLZJ-M2 is obtained, which can be used to compression processing of wood. If the temperature of the room or water is too low, which results in slow dissolve, hot water which temperature is not higher than 50℃ can be used to dissolve the flame retardant.

⑵ Flame retarding of wood: TLZJ-M2 flame retardant applies to flame retarding treatment of wood in variety of ways. The temperature of treating solution should be proper at room temperature (20-40 centigrade) . It is high efficient in production and the quality of product is good with the treatment of vacuum/pressurization.

⑶ Recycling of treating solution: the surplus treating solution can be reused directly, which doesn’t need to be disposed after recycling. The concentration of treating solution remains the same unless it is exposed to the air for a long time; It also won’t be changed for times of wood processing.

(4)Wood test Doing wood flame retarding test at the room temperature under normal pressure, put wood into the solvent and soak for 72 hours to let the medicament infiltrate into the wood thoroughly.

Packing,Storage & Transportation

Packed in 25kg plastic woven bag lined with plastic PE inner bag. It shall be kept away from rain, moisture, and direct sunlight during storage; it shall be inedible and kept out of reach of children. Transported as nomal chemicals. 17mt/fcl without pallets.

• MSDS
• COA